Saab 900s Short Belt Modification

Posted by RS Published in Repair Manuals

Why doing this modification ?

First, it bypass one of the idler plastic pulley (the hardest to change!).
Second, it allows you to install a less expensive and easier to find belt.
Third, it allows you to change at the same time, the idler pulley #6, the one that fail the most.


Engine without Modification	Engine with Modification

Cleaning the IAC Valve for the Saab 900s and N900NG (February 8th, 2009)
Changing a Saab 900 S Clutch (June 25th, 2008)
Seatbelt recoil repair (December 17th, 2007)
Heater core removal & Installation (August 12th, 2007)
Changing the Cyclop’s Light & Access To Wiper Motor (August 12th, 2007)

Subscribe to this post comment rss or trackback url

biker495 said in February 12th, 2009 at 3:43 am

hey thanks for the help with the short belt mod

pillha8ter said in November 25th, 2009 at 3:00 pm

does this mod effect any timeing issues??

Harquebus said in February 27th, 2010 at 5:42 am

No, no timing issues since this is not a timing belt; it just powers the accessories (AC, pwr steering, water pump, etc.) One less thing to fail.

Please Note: Comment moderation maybe active so there is no need to resubmit your comments

Related Articles