 Picture #1: You have to remove the hatch panel first. |
 Picture #2: Here are the screws that you have to remove to remove the hatch inside cover. |
 Picture #3: Remove the handle. Use the torx screwdriver that come with the car. |
 Picture #4: You have to turn that screw 1/4 turn to disengage it. |
 Picture #5: Here another torx screw. |
 Picture #6: There is another screw under the plastic panel. |
 Picture #7: Here the passenger side inside hatch. |
 Picture #8: Here the driver side inside hatch. |
 Picture #9: Here the wiper motor. No problem with it yet, so no more picture on it! |
 Picture #10: Here the four cyclop bulbs location. Change all four unless you want to repeat this procedure over and over. |
 Picture #11: Here a closeup of the bulbs assembly. Just turn 1/4 turn the plastic socket and change the bulb. Et voilà! |
Related Articles
No user responded in this post
Leave A Reply
Please Note: Comment moderation maybe active so there is no need to resubmit your comments